Run a Volvo or a Mack? You can now change its road speed, cruise speed and idle shutdown from your phone. The new Parameters screen in OTR Diagnostics reads them straight from the engine and changes them in minutes, with no dealer visit or laptop. Android is coming soon.
Covered vehicles
| Model years | Make | Common models | Engine |
|---|---|---|---|
| 2014–2026 | Volvo | VNL, VNR, VNX, VHD, VAH | Volvo D11, D13, D13TC, D16 |
| 2014–2026 | Mack highway | Anthem, Pinnacle | Mack MP7, MP8 |
| 2014–2026 | Mack refuse and vocational | LR and TerraPro garbage trucks, Granite | Mack MP7, MP8, MP10 |
| 2014–2026 | Buses and motorhomes | Coaches, buses and motorhomes built on a chassis with a supported Volvo or Mack engine | Volvo D11, D13; Mack MP7, MP8 |
These are common models, not a complete list, and not every model was built with every engine in every year. Coverage goes by the engine, not the body maker. Not sure? Check your truck in the app under More > About. Volvo or Mack with a Cummins engine? See Cummins: change your road speed from your phone.
What you can change

Customer Road Speed: the top speed the truck will go, whatever the throttle does. This is the one most owners change.
Legal Road Speed: the top road speed limit set for the truck. Customer Road Speed always stays at or below it.
Max Cruise Speed: the highest speed cruise control can be set to.
Idle Shutdown: turns automatic idle shutdown on or off.
Idle Shutdown Time: how long the engine idles before it shuts itself down.
The app reads the related settings first, so it won't let you set Customer Road Speed above Legal Road Speed.
Why change it?
Save fuel. The U.S. EPA's SmartWay program says a combination truck at 55 mph uses up to 7 percent less fuel than one at 65 mph, and lower top speeds mean less wear on the engine, tires and brakes (EPA SmartWay: Reducing Highway Speed).
Match your speed policy. Set a top speed that fits your company policy and the roads you run, and keep cruise just under it.
Cut idling. EPA estimates a typical combination truck burns about 0.8 gallons of diesel for every hour it idles, and unnecessary idling adds engine wear (EPA SmartWay: Idle Reduction). Many states and cities also limit idling (U.S. Department of Energy: idle reduction laws). Idle Shutdown handles it for you.
Do it yourself, in minutes. No dealer appointment, no laptop and no extra software. Make the change at the truck.
Before you start
Update OTR Diagnostics to version 4.3.0 or newer from the App Store.
Have an active OTR Diagnostics Single Truck or Pro plan.
Plug your OTR adapter (we recommend the OTR Link 2) straight into the diagnostic port, not into an ELD or a Y-splitter, and connect to the truck in the app.
Turn the key on and leave the engine off. Keep it that way until the change is finished.
How to change your road speed
On the Dashboard, tap CHANGE PARAMETERS. (Or open the Commands tab and tap Change parameters.)
Under Road Speed, tap Customer Road Speed.
Check the key and engine: Turn key - ON, Engine - OFF. Tap Continue.
Pick the new speed with the slider, the − and + buttons, a preset, or Type a value. Then tap Set to your new speed, for example Set to 65 mph.
The app shows Programming ECM. Keep the key on and the engine off.
You'll see Update saved, for example "Customer Road Speed is now 65 mph." If the app asks you to turn the key off and on, do that to apply the change.
Cruise speed and idle shutdown work the same way.
Newer engine software. On a few newer Volvo and Mack software versions, a setting shows "Not supported on this truck yet". That means the app can read the truck but can't change that setting on its software yet, so nothing is changed. The other settings still work.
FAQ
What's the difference between Customer Road Speed and Legal Road Speed?
Legal Road Speed is the upper limit. Customer Road Speed is the top speed the truck actually runs, and it can't be set higher than Legal Road Speed. To lower your top speed, change Customer Road Speed.
An idle setting shows a dash instead of a value.
The engine didn't report that value. Close Parameters and open it again. On some Volvo and Mack trucks the idle settings stay blank.
What does "Change not confirmed" mean?
The engine didn't confirm the new value. Tap Turn the key off, then start over, then open Parameters to check the value before you try again.
Get started
Get OTR Diagnostics on the App Store
On Android? The same Parameters screen is coming soon, and we'll post here when it's out.
New to OTR Diagnostics? See plans and the OTR Link 2 adapter →
Step-by-step help: How to change road speed and idle shutdown on a Volvo or Mack engine and How to change road speed and cruise speed in OTR Diagnostics. Questions? Contact us or call (586) 799-4375, Monday to Friday, 8 am to 5 pm Eastern.





Detroit Diesel: change your road speed from your phone
Cummins: change your road speed from your phone