Black Friday sale: up to $100 off OTR Diagnostics + free OTR Link 2 hardware ($299 value) · Shop nowBlack Friday: up to $100 off + free hardware · Shop now

Run a truck with a Cummins engine? You can now change its road speed, cruise speed and idle shutdown from your phone. The new Parameters screen in OTR Diagnostics reads them straight from the engine and changes them in minutes, with no dealer visit or laptop. Android is coming soon.

Covered vehicles

Model years Make Common models Engine
2010–2024 Kenworth T680, T880, W900, T800 Cummins ISX15 / X15, ISX12 / X12
2010–2024 Peterbilt 579, 389, 567, 367 Cummins ISX15 / X15, ISX12 / X12
2010–2024 Freightliner Cascadia, Coronado, M2 106, M2 112, 114SD, 122SD Cummins ISX15 / X15, ISX12 / X12, ISL9 / L9, ISB6.7 / B6.7
2010–2024 Western Star 4700, 4800, 4900, 5700XE, 47X, 49X Cummins ISX15 / X15, ISX12 / X12, ISL9 / L9
2010–2024 International ProStar, LT, LoneStar, HX, MV, HV Cummins ISX15 / X15, ISL9 / L9, ISB6.7 / B6.7
2010–2024 Buses and motorhomes Coaches, school and transit buses, and motorhomes built on a chassis with a supported Cummins engine Cummins ISX15 / X15, ISX12 / X12, ISL9 / L9, ISB6.7 / B6.7

These are common models where a Cummins engine was fitted. They aren't a complete list, and not every model was built with every engine in every year. Coverage goes by the engine, not the truck or body maker. Not sure? Check your truck in the app under More > About.

2025–2027 Cummins: coming soon. Parameter changes for 2025 to 2027 Cummins engines are on the way. We'll post here when they're ready.

What you can change

The OTR Diagnostics Parameters screen on a Cummins engine (Max Road Speed, Max Accelerator Speed, Max Cruise Speed, Idle Shutdown, Idle Shutdown Time) and the Max Road Speed editor set to 70 mph
  • Max Road Speed: the top speed the truck will go, whatever the throttle does.

  • Max Accelerator Speed: the top speed you can reach with the pedal alone. Some fleets set it a little below cruise so the truck runs fastest on cruise control.

  • Max Cruise Speed: the highest speed cruise control can be set to.

  • Idle Shutdown: turns automatic idle shutdown on or off. It isn't on every engine; the app shows it when yours has it.

  • Idle Shutdown Time: how long the engine idles before it shuts itself down.

The app checks the related settings for you: Max Cruise Speed and Max Accelerator Speed can't go above Max Road Speed.

Why change it?

  • Save fuel. The U.S. EPA's SmartWay program says a combination truck at 55 mph uses up to 7 percent less fuel than one at 65 mph, and lower top speeds mean less wear on the engine, tires and brakes (EPA SmartWay: Reducing Highway Speed).

  • Match your speed policy. Set a top speed that fits your company policy and the roads you run, and keep cruise just under it.

  • Cut idling. EPA estimates a typical combination truck burns about 0.8 gallons of diesel for every hour it idles, and unnecessary idling adds engine wear (EPA SmartWay: Idle Reduction). Many states and cities also limit idling (U.S. Department of Energy: idle reduction laws). Idle Shutdown handles it for you.

  • Do it yourself, in minutes. No dealer appointment, no laptop and no extra software. Make the change at the truck.

Before you start

  • Update OTR Diagnostics to version 4.3.0 or newer from the App Store.

  • Have an active OTR Diagnostics Single Truck or Pro plan.

  • Plug your OTR adapter (we recommend the OTR Link 2) straight into the diagnostic port, not into an ELD or a Y-splitter, and connect to the truck in the app.

  • Turn the key on and leave the engine off. Keep it that way until the change is finished.

How to change your road speed

  1. On the Dashboard, tap CHANGE PARAMETERS. (Or open the Commands tab and tap Change parameters.)

  2. Under Road Speed, tap Max Road Speed.

  3. Check the key and engine: Turn key - ON, Engine - OFF. Tap Continue.

  4. Pick the new speed with the slider, the − and + buttons, a preset, or Type a value. Then tap Set to your new speed, for example Set to 65 mph.

  5. The app shows Programming ECM. Keep the key on and the engine off.

  6. You'll see Update saved and Turn the key off. Turn the key off, tap Key is off, start timer and leave it off for 100 seconds.

  7. When the timer reaches zero, turn the key back on without starting the engine. The app checks the new value with the engine, for example "Max Road Speed is now 65 mph." Tap Done.

Four OTR Diagnostics screens on a Cummins engine: the key on, engine off check, Programming ECM, Update saved with Turn the key off, and the Keep the key off countdown

Cruise speed and idle shutdown work the same way, including the 100-second key-off.

FAQ

Why do I have to turn the key off for 100 seconds?

A Cummins engine stores a new setting while the key is off. The app times the 100 seconds for you, then checks the value with the engine when you turn the key back on.

Is my 2025 or newer Cummins covered?

Not yet. Parameter changes for 2025 to 2027 Cummins engines are coming soon.

What does "Change not confirmed" mean?

The engine didn't confirm the new value. Tap Turn the key off, then start over, then open Parameters to check the value before you try again.

Get started

Get OTR Diagnostics on the App Store

On Android? The same Parameters screen is coming soon, and we'll post here when it's out.

New to OTR Diagnostics? See plans and the OTR Link 2 adapter →

Step-by-step help: How to change road speed and idle shutdown on a Cummins engine and How to change road speed and cruise speed in OTR Diagnostics. Questions? Email support@otrperformance.com or call (586) 799-4375, Monday to Friday, 8 am to 5 pm Eastern.