Black Friday sale: up to $100 off OTR Diagnostics + free OTR Link 2 hardware ($299 value) · Shop nowBlack Friday: up to $100 off + free hardware · Shop now

  1. Help Center
  2. OTR Diagnostics

How to change road speed and cruise speed in OTR Diagnostics

On supported Detroit Diesel, Cummins, Volvo and Mack engines you can read and change the road speed, cruise speed and idle shutdown settings in the OTR Diagnostics app. You do it on the Parameters screen while the key is on and the engine is off, and the engine confirms each change before the app shows it as saved. The Android app is getting the same screen soon.

Which trucks have Parameters

Engine Model years Common trucks Step-by-step
Detroit Diesel DD5, DD8, DD13, DD15, DD16 2011–2026 Freightliner, Western Star, including medium duty Detroit Diesel
Volvo D11, D13, D16 and Mack MP7, MP8, MP10 2014–2026 Volvo VNL, VNR, VNX, VHD, VAH; Mack Anthem, Pinnacle, Granite, LR and TerraPro garbage trucks Volvo and Mack
Cummins ISX15/X15, ISX12/X12, ISL9/L9, ISB6.7/B6.7 2010–2024 (2025–2027 coming soon) Kenworth, Peterbilt, Freightliner, Western Star, International Cummins
  • Coverage goes by the engine, not the truck or body maker, so buses, coaches and motorhomes with one of these engines are covered too.
  • The app reads your engine and shows only the settings it supports there. If a setting isn't listed for your truck, the app can't change it.
  • To see what the app detected, open More > About. It shows the Engine Profile and, on Detroit, the CPC.
  • Paccar MX and International (A26, N13, MaxxForce) engines don't have Parameters yet. They keep their fault codes, live data and commands.

Not sure about a truck? Check our Vehicle compatibility page or contact support.

The settings

  • Max Road Speed (Customer Road Speed on Volvo and Mack): the top speed the truck will go, whatever the throttle does.
  • Legal Road Speed (Volvo and Mack): the top road speed limit set for the truck. Customer Road Speed can't go above it.
  • Max Accelerator Speed (Cummins): the top speed you can reach with the pedal alone.
  • Max Cruise Speed: the highest speed cruise control can be set to.
  • Min Cruise Speed (Detroit): the lowest speed cruise control can be set to.
  • Cruise Power (Detroit CPC2 and CPC02T): whether cruise uses the high power rating, the low one, or either.
  • Idle Shutdown: turns automatic idle shutdown on or off.
  • Idle Shutdown Time: how long the engine idles before it shuts itself down.
  • Parameter Password (Detroit): a 4-character password that stops anyone else from changing these settings.

What you need

  • OTR Diagnostics 4.3.0 or newer on your iPhone or iPad. See How do I get updates?
  • An active OTR Diagnostics Single Truck or Pro plan. Without one, the Commands tab shows "Your subscription is not active." and the Parameters card doesn't appear. See Which OTR Diagnostics plan is right for me?
  • Your OTR adapter (we recommend the OTR Link 2) plugged straight into the diagnostic port (not into an ELD or a Y-splitter) and connected in the app.
  • The key on and the engine off, for the whole change.
  • No other command running. While one is, the Parameters screen says "Finish the running command before you change a parameter." and the settings are greyed out.
  • On a Detroit engine with a parameter password, the 4-character password.

Open the Parameters screen

  • On the Dashboard, the PARAMETERS card shows the current road speed, cruise speed and idle settings. Tap CHANGE PARAMETERS.
  • Or open the Commands tab and, on the Parameters card ("Top speed limits, cruise control and idle shutdown."), tap Change parameters.

Settings are grouped under ROAD SPEED, CRUISE CONTROL and IDLE. Each shows a short description and the value the engine reports now. A spinner means the value is still being read; a dash (—) means the engine didn't report it. Speeds show in mph or km/h, following the app's units setting.

Change a setting

  1. Tap the setting, for example Max Road Speed (on Volvo and Mack, Customer Road Speed).
  2. The next screen shows two checks: Turn key - ON and Engine - OFF. Make sure both are true at the truck, then tap Continue.
  3. If the screen says the setting is locked, enter the 4-character parameter password and tap Continue.
  4. Choose the new value:
    • For a speed or a time, drag the slider, use − and +, tap a preset, or tap Type a value. The line under the number shows the current value and the difference, for example "Current 78 mph · -3".
    • For Idle Shutdown or Cruise Power, tap one of the choices.
  5. Tap Set to the new value, for example Set to 65 mph.
  6. The app shows Programming ECM: "Writing your new Max Road Speed to the engine. Keep the key on and the engine off." Don't close the app or turn the key off.
  7. When the engine confirms the value, the app shows Update saved, for example "Max Road Speed is now 65 mph."

After the change

  • Detroit, Volvo and Mack: the screen says "The change was applied." If it says "Turn the key off and on to apply the change.", do that. Tap Done.
  • Cummins: the engine stores the value during a key cycle. The app says "Turn the key off" and "Leave it off for 100 seconds so the engine can store the new value."
    1. Turn the key off and tap Key is off, start timer.
    2. Wait for the countdown. When it reaches zero, turn the key back on. Don't start the engine.
    3. The app checks the new value with the engine. This can take up to a minute after the key comes back on. Tap Done.

Built-in limits

The app reads the related settings first and won't let you pick a value that conflicts with them:

  • Detroit: Min Cruise Speed can't go above Max Cruise Speed, and Max Cruise Speed can't go above Max Road Speed.
  • Cummins: Max Cruise Speed and Max Accelerator Speed can't go above Max Road Speed.
  • Volvo and Mack: Customer Road Speed can't go above Legal Road Speed.

When a limit applies, the editor says so, for example "Max Road Speed is 65 mph so this can't go higher." To go past it, change the other setting first. Choose values that are legal and safe where the truck runs.

The parameter password (Detroit)

On Detroit engines, Parameter Password appears under SECURITY on the Parameters screen. It shows On when a password is set and Off when it isn't.

  • Set password: enter a new password twice. It must be 4 letters or numbers.
  • Change password: enter the current password, then the new one twice.
  • Remove password: enter the current password. After that, anyone can change this engine's parameters.
  • I don't know the password: removes the password using the engine's VIN, without the current password. The app asks you to confirm first.

If the password is wrong, the app says "That password is not correct. Nothing was changed."

Messages and what to do

  • "No adjustable parameters": this engine has no settings the app can change.
  • "Not available" ("Connect to the truck to read and change this setting."): reconnect to the truck and tap Try again.
  • "Couldn't check the limits": the engine didn't answer while the app read the related settings, so nothing was changed. Check the connection and try again.
  • "Can't change this right now" ("The other speed settings leave no room for this one. Change them first."): change the related setting first.
  • "Value not allowed": the value is outside what this truck allows. Go back and pick another.
  • "Not supported on this truck yet": this truck's software has no known location for the setting, so nothing was changed. This happens on a few newer Volvo and Mack engine software versions.
  • "Change not confirmed": the engine didn't confirm the new value. Tap Turn the key off, then start over, open Parameters again and check the value before you try again. If the app asks for a password ("If this engine has a password, enter it and try again."), enter it and tap Try again with password.
  • "The engine still reads …" after a key cycle: the new value didn't stick. Go back and try the change again.
  • "The engine didn't answer. Open Parameters to check the new value.": open Parameters and look at the value before changing it again.
  • A setting shows a dash: close Parameters and open it again. On some Volvo and Mack trucks the idle settings stay blank. On Cummins engines the values can stay blank after reconnecting. If that happens, contact support.

Good to know

Need help? Contact our support team at support@otrperformance.com or (586) 799-4375, Monday to Friday, 8 am to 5 pm Eastern.

Related

Still need help? Contact us