How to change road speed and idle shutdown on a Detroit Diesel engine
On a Freightliner or Western Star with a Detroit Diesel DD5, DD8, DD13, DD15 or DD16, you can read and change the road speed, cruise speed and idle shutdown settings in the OTR Diagnostics app. You do it on the Parameters screen with the key on and the engine off, and the engine confirms each change before the app shows it as saved. Android is coming soon.
Covered vehicles
| Model years | Make | Common models | Engine |
|---|---|---|---|
| 2011–2026 | Freightliner | Cascadia, Coronado, M2 112, 114SD, 122SD | DD13, DD15, DD16 |
| 2011–2026 | Freightliner medium duty | M2 106, M2 112, 108SD, 114SD | DD5, DD8 |
| 2011–2026 | Western Star | 4700, 4800, 4900, 5700XE, 47X, 49X, 57X | DD13, DD15, DD16 |
| 2011–2026 | Western Star medium duty | 47X, where built with a DD8 | DD8 |
| 2011–2026 | Buses and motorhomes | Coaches, school and transit buses, and motorhomes on a chassis with a supported Detroit engine | DD5, DD8, DD13, DD15, DD16 |
- Common models only, not a complete list, and not every model was built with every engine in every year. Coverage goes by the engine, not the truck or body maker.
- To see what the app detected, open More > About. It shows the Engine Profile and the CPC (the engine's controller). The app shows only the settings your CPC supports.
- Truck has a Cummins engine? See How to change road speed and idle shutdown on a Cummins engine.
The settings
- Max Road Speed: the top speed the truck will go, whatever the throttle does.
- Max Cruise Speed: the highest speed cruise control can be set to.
- Min Cruise Speed: the lowest speed cruise control can be set to.
- Cruise Power (CPC2 and CPC02T only): whether cruise uses the high power rating, the low one, or either.
- Idle Shutdown: turns automatic idle shutdown on or off. On a CPC501T you also choose whether it needs the parking brake set, or whether the accelerator pedal restarts the timer.
- Idle Shutdown Time: how long the engine idles before it shuts itself down.
- Parameter Password: a 4-character password that stops anyone else from changing these settings.
The app keeps them consistent: Min Cruise Speed can't go above Max Cruise Speed, and Max Cruise Speed can't go above Max Road Speed. To go past one, change the other setting first.

What you need
- OTR Diagnostics 4.3.0 or newer on your iPhone or iPad.
- An active OTR Diagnostics Single Truck or Pro plan.
- Your OTR adapter (we recommend the OTR Link 2) plugged straight into the diagnostic port (not into an ELD or a Y-splitter) and connected in the app.
- The key on and the engine off, for the whole change.
- No other command running.
- If the engine has a parameter password, the 4-character password.
Change a setting
- On the Dashboard, tap CHANGE PARAMETERS on the PARAMETERS card. Or open the Commands tab and tap Change parameters.
- Tap the setting, for example Max Road Speed.
- Check Turn key - ON and Engine - OFF at the truck, then tap Continue.
- If the setting is locked, enter the parameter password and tap Continue.
- Choose the new value with the slider, − and +, a preset, or Type a value. For Idle Shutdown or Cruise Power, tap a choice.
- Tap Set to the new value, for example Set to 65 mph.
- The app shows Programming ECM. Don't close the app or turn the key off.
- You'll see Update saved, for example "Max Road Speed is now 65 mph.", and "The change was applied." If it says "Turn the key off and on to apply the change.", do that. Tap Done.
The parameter password
Under SECURITY on the Parameters screen, Parameter Password shows On or Off.
- Set password: enter a new 4-character password twice (letters or numbers).
- Change password: enter the current password, then the new one twice.
- Remove password: enter the current password.
- I don't know the password: removes it using the engine's VIN. The app asks you to confirm first.
Troubleshooting
- A setting shows a dash (—): the engine didn't report it. Close Parameters and open it again.
- "Change not confirmed": the engine didn't confirm the new value. Tap Turn the key off, then start over, open Parameters and check the value before you try again. If the app asks for a password, enter it and tap Try again with password.
- "That password is not correct. Nothing was changed.": check the password and try again, or use I don't know the password.
- "Can't change this right now": the other speed settings leave no room. Change them first.
- "Not available": reconnect to the truck and tap Try again.
- No Parameters card: check that your Single Truck or Pro plan is active, the app is up to date, and the Engine Profile under More > About isn't "Generic". See Commands not appearing in the app.
Need help? Contact our support team at support@otrperformance.com or (586) 799-4375, Monday to Friday, 8 am to 5 pm Eastern.
Related
Still need help? Contact us

