Black Friday sale: up to $100 off OTR Diagnostics + free OTR Link 2 hardware ($299 value) · Shop nowBlack Friday: up to $100 off + free hardware · Shop now

  1. Help Center
  2. OTR Remote Diagnostics

How to send a remote command, and why one may be unavailable

You can send commands such as a fault code reset or a forced regen to a truck from the Commands tab in OTR Remote. Each command only works when the truck is in the right state, and OTR Remote checks that before it sends.

What must be true first

  • Every command: the adapter (the OTR Remote Diagnostics device in the truck) is online.
  • Resets and installs (for example Reset Fault Codes): key ON, engine OFF. Reset DEF Derate and Reset EGR Derate also work with the engine running.
  • Regens (Forced DPF Regen, Forced SCR Regen, Forced SCR Efficiency Regen, Crystal DEF Sublimation, and Forced SCR Performance Test on Cummins): engine running, truck stopped, parking brake set, no pedals pressed.
  • Purge SCR/DEF Module and Evaluate SCR System: key ON, engine running.

Send a command

  1. Open the vehicle and click the Commands tab. Vehicle Command Readiness shows the truck's state, such as "Key On, Engine Off. Reset commands are ready."
  2. Click Execute next to the command.
  3. For a reset, the dialog checks Adapter Connected, Key On and Engine Off. Click Send Command.
  4. For a regen, read the Safety Warning and Vehicle Requirements, tick "I confirm the vehicle is in a safe location and meets all requirements" and click Start (for example Start Forced DPF Regen).
  5. On a Detroit Forced SCR Efficiency Regen, click Continue. Someone at the truck must scroll the dash to the "Diesel Particulate Filter" menu and press OK on the steering controls. Then click I pressed OK on steering controls.

Every command shows on the vehicle's Activity tab.

Why a command is greyed out or unavailable

  • The truck is offline. The tab says "Vehicle must be online to execute commands".
  • Another command is running. Wait for it to finish. During a regen, the other regens are hidden and the other buttons say Unavailable.
  • The adapter is updating. A banner says Updating firmware and "Commands are paused until the update finishes." The adapter may go offline for a few minutes. When it says "Commands are available again.", carry on.
  • The truck is not in the right state. A line under the command tells you why, such as "Key is off. You'll need to confirm an override to send this." You can still click Execute, but the button in the dialog says Vehicle not ready until the truck is ready or you tick the override.
  • Commands are still loading. "Loading available commands from the vehicle..." Click Retry if it takes long.

The override

OTR Remote reads the truck's state from live data, and live data can be stale or incomplete. If you know the truck is ready but the dialog says "Vehicle checks not met", tick Override and send anyway. and click Send Anyway (for a regen, the Start button). The engine may still reject the command. There is no override while the truck is offline.

Stop a regen

While a regen runs, a Regen tab shows it in progress with the elapsed time. Click Abort. You can also click Abort on the Commands tab and then Abort Command. At the truck, pressing any pedal or turning off the engine also stops it. Exhaust temperatures may still be dangerously high afterwards, so keep away from the exhaust.

Commands by engine

The Commands tab only lists the commands for that truck. Which ones it gets depends on the engine and its model year.

  • Detroit Diesel: Reset Fault Codes, Reset DPF Ash Accumulator, Reset SCR Accumulator, Forced DPF Regen, Forced SCR Efficiency Regen.
  • Cummins: Reset Fault Codes, Aftertreatment Maintenance Reset All, Aftertreatment Maintenance Filter Installation, Forced DPF Regen, Forced SCR Performance Test.
  • Paccar MX: Reset Fault Codes, Reset DEF Derate, Reset EGR Derate, Reset Soot Level, Enable Regen After Repair, Install a New DPF, Install a Cleaned DPF, Purge SCR/DEF Module, Forced DPF Regen, Evaluate SCR System.
  • Volvo and Mack: Reset Fault Codes, Reset Aftertreatment, Forced DPF Regen, Forced SCR Regen, Crystal DEF Sublimation.

Speed and idle settings on supported Detroit trucks are on the Parameters tab, not the Commands tab.

Related

Still need help? Contact us