Black Friday sale: up to $100 off OTR Diagnostics + free OTR Link 2 hardware ($299 value) · Shop nowBlack Friday: up to $100 off + free hardware · Shop now

  1. Help Center
  2. OTR Remote Diagnostics

Features & Capabilities

What remote commands can I actually send? 

Depending on engine make and model, you can: 

  1. Force a DPF regeneration 
  1. Reset fault codes 
  1. Clear certain derates 
  1. Run aftertreatment resets and tests, such as Reset DPF Ash Accumulator, Install a New DPF, Forced SCR Regen, Crystal DEF Sublimation or Evaluate SCR System
  1. Change the max road speed, cruise speeds and idle shutdown on supported Detroit Diesel trucks

Not all commands are available on all engines. Check with our team for your specific trucks. 

For the list by engine, and what must be true before a command works, see How to send a remote command, and why one may be unavailable. For speed and idle settings, see Change a truck's speed limit and idle shutdown from your desk. Live engine readings are on each vehicle's Live Data tab; see Read live data in OTR Remote.

How quickly do I get fault code alerts? 

Alerts are sent within seconds of a fault code triggering. You'll know about problems before your driver calls you. 

You choose which alerts you get: fault codes, dash lamps, live data readings and geofences, by email, SMS or both. See Set up email and SMS alerts in OTR Remote.

Does OTR Remote predict failures or just report them? 

OTR Remote reports what each truck is sending and keeps its history. It helps you catch a problem early:

  • Each vehicle has a health score out of 100, based on its warning lamps, fault codes and live readings. Click it to see what is pulling it down. See What the vehicle statuses and health score mean.
  • Live data alerts tell you when a reading crosses a limit you set, such as a low battery, low DEF, an engine running hot or a DPF regen that is overdue.
  • The Activity tab shows when a fault code cleared, came back or keeps coming and going.

Can OTR Remote diagnose problems or just show codes? 

OTR Remote provides full diagnostic information, not just code numbers. You'll see what the code means, what typically causes it, whether it's likely to cause a derate, and recommended next steps.  

Open a code on the vehicle's Fault Codes tab to read it. When there is no ready-made entry for a code, OTR Assist writes an analysis. See Read a fault code in OTR Remote.

Can I see what happened on a truck earlier?

Yes. Each vehicle's Activity tab puts its fault codes, warning lamps, commands and alerts in one timeline, day by day. You can scroll back or pick a date, and replay a regen to see its exhaust temperatures, soot level and live data. See Use the Activity tab and replay a regen.

Can I change a truck's speed limit remotely?

Yes, on supported Detroit Diesel trucks. You can set the max road speed, the cruise speeds and the idle shutdown from the Parameters tab, which appears only on trucks that support it. See Change a truck's speed limit and idle shutdown from your desk.

Still need help? Contact us