DTC Reset Tool | Detroit Diesel | 07-16
DTC Reset Tool | Detroit Diesel | 07-16
DTC Reset Tool | Detroit Diesel | 07-16
DTC Reset Tool | Detroit Diesel | 07-16
DTC Reset Tool | Detroit Diesel | 07-16

DTC Reset Tool | Detroit Diesel | 07-16

Regular price $299.95 Sale price $199.95

The tool provides a reliable way to clear your active or inactive fault codes. The combo tool will give you complete functionality in performing the task with ease. DTC reset tool will provide you with the most access you need to do the job quickly and efficiently without having to have any dealer level access. 

DTC Features: 

  • Reset Active / Inactive Faults
  • OEM level commands, don't need to have Detroit DDDL 
  • Complete simple to use the tool without needing anything additional
  • Reset ALL Modules located on J1708 / J1939 Systems
  • Works on Freightliner, Western Star, and other models with DD engines.

With having so many fault codes on your truck you don’t want to continue driving the truck without making sure it’s safe to drive. Having this tool in your truck will ensure you can always make it home or remove a temporary Derate due to a failed sensor.

This DTC reset tool is a plug & play tool that will reset your fault codes. This sends the same OEM level resets so you will know that everything is included in the module. This is a great tool to have for any driver, the fleet owner or shop owner. The product is used solely for the purpose of clearing “Active or Inactive” fault codes on all of the modules that are present in the truck. 

Specific trucks 2011 and newer will display fault codes on the dashboard, most of the time it will trigger a check engine light or check module message. When this happens, you will automatically start to notice a screen stating the error has occurred. A lot of times these codes appear but they fall into the category of “Ghost Code”. The meaning “Ghost code” is from a fault code was triggered due to certain conditions that will be almost impossible to recreate. This causes excessive downtime in trying to find a repair shop to figure out if this is serious or not. This also misleads the owner into thinking this is a serious problem with the truck. The DTC tool that will keep you in control of downtime. Clearing the fault code once and seeing if the fault codes come back. If it comes back a second time, then you can proceed with taking the matter seriously.

DTC Chassis Coverage

  • Freightliner Trucks – All Models
  • Western Star Trucks – All Models

Freightliner / Western Star Modules 
J1587/1708 Protocol:

  • Transmission ECU (MID130) – Eaton Fuller / Meritor Wabco
  • ABS / Brake ECU (ABS136) - Eaton Fuller / Meritor Wabco
  • Instrument Cluster Unit (ICU140) 
  • Bulkhead Module ECU (BH164)
  • Standard SAE J1708 Fault Codes

Freightliner / Western Star Modules
J1939 Protocol

  • Motor Control Module (MCM) -ENG 
  • Common Powertrain Module (CPC)
  • Aftertreatment Control Module (ACM) -EEC61 
  • SAM Cabin Module
  • SAM Chassis Module
  • Central Gateway Module
  • ABS / Brake Module (SA11) 
  • Instrument Cluster Unit (ICU) Module (SA23)
  • Bulkhead Module / Body Controller (CAB33) 
  • Modular Switch Field Module (SFU49)
  • Standard J1939 Fault Codes

Coverage:

Freightliner Trucks - All Models - Detroit Diesel

Western Star Trucks - All Models - Detroit Diesel

Diagnostic Connector: 9-pin Round - 07-16

DD60 EPA07 (DPF Only)
DD13 EPA07 (DPF Only)
DD15 EPA07 (DPF Only)
DD16 EPA07 (DPF Only)
DD60 EPA10 (DPF + DEF)
DD13 EPA10 (DPF + DEF)
DD15 EPA10 (DPF + DEF)
DD16 EPA10 (DPF + DEF)
DD13 GHG14 (DPF + DEF)
DD15 GHG14 (DPF + DEF)
DD16 GHG14 (DPF + DEF)

How to use

Start a timer to make sure you perform the service correctly

  1. Turn ignition OFF for ONE(1) minute.
  2. Turn ignition to accessory position (Key On/Engine Off) for ONE(1) minute 
  3. Connect DTC reset tool to 9-Pin connection under the dash
  4. Reset Codes - Leave plugged for 1 minute
  5. Look on dashboard, CEL will disappear and ABS should start clicking
  6. Check for faults, if faults are still present repeat steps 1-4 if no faults are present continue to step 7.
    *NOTE: if fault codes remain "Active" then it is required for the truck to be taken to a service shop for further diagnosis. 
  7. Disconnect the DTC reset tool

    DTC Reset Tool – (9 Pin Adaptor only)- SKU: OTR20
    - Freightliner, Western Star EPA07, EPA10, GHG14